Double DIN Dash Kit for 2006-2011 Honda Civic with Antenna Adapter & Harness… (Metallic Taupe) | Compatible with All Trim Levels

Product Information

I also only plan to use the stereo for USB MP3 or internet radio which doesn't need DAB or anything else. I just fitted the dynamic sounds kit and no problems at all, just needs abit if the left dash trimming . My steering wheel buttons don't appear to work with the stereo but I can't be bothered to splice wires or experiment.

Reversing Cameras CMOS-230 Kenwood CMOS-230 Universal InCar Rear View Reversing Camera - Key Features Wide-angle mirror image 1/3. I almost bought the pioneer in questions, there was one thing spec wise that the Kenwood had better and I can't rember what it was. So first to say, it's not the easiest thing because there are a lot of small things to bear in mind.But this was a temp install, I need to wire the cable through the harness in the boot lid like factory and splice and solder the joints and may drill a hole and use a cable grommet.

e. fascia panels Wiring Harness adaptors, Steering Wheel Control Stalk interfaces, Aerial adaptors etc. There's a cheap Pioneer and Kenwood unit that only mirrors, I believe they're exactly the same as one other except for the badge. I wired this into reverse light, so when it goes into reverse it powers up the camera and on the other end triggers the HU to go into display mode.Head units generally come in either single DIN (180 x 50 mm panel) or double DIN (180 x 100 mm panel) size. I'm going to install some components up front soon and have a amp in the wheel well to run it, will wire up the camera properly then. it slams, im just asking basic question to those with doubledin head units, does it sit flush or close to or is it set deep in. I personally have one of the 10 inch tablet style screens, and I would highly recommend that over what you have, mine works amazingly and has all of the newer styled car features.

Kit comes with a single and double din matt black fascia with mounting brackets so no cage kit is required. We do not take any responsibility for China units not fitting as they are not industry standard size. The fit wasn't great out of the box, so I'm sure if I had just screwed the stuff in there instead of taking the time to fool with everything like I did, I would more than likely have the same problems. The head unit is really good BTW, screen is bright enough, touchscreen and UI responsive, didn't notice any issues so far, except the navigation voice volume.Some knowledge of car audio installation is helpful, as in some rare case "modification" is necessary. Car Audio Stereo Installation kit for installing a new after market double din headunit into your Honda. For the left hand drive, and for whatever reason, the Connects2 kit was almost 2x more expensive everywhere I checked. Grounding - don't know where to start or where to look, antenna amplifier ground seems to be properly connected and not corroded.