MagiColor Permanent Hair Color (6) Dark Blonde 100ml

Product Information

If SNMP is set to Y, then the printer model should work with a *LAN 3812 SNMP device description, which communicates with the printer and print server using the Small Network Management Protocol (SNMP).

Not enough is known about this printer, the network interface card (NIC), or the external print server typically shipped with the printer to know whether a *LAN 3812 SNMP device description will work or not. The term IBM PPDS refers to the IBM Personal Printer Data Stream. PPDS was development by IBM and was used in older IBM and Lexmark laser printers. If LPR is set to Y, then the printer model should work with a Remote Output Queue or a *LAN 3812 device description that uses the TSPLPRD utility, both of which communicate with the printer and print server using the TCP/IP Line Printer Requester (LPR) protocol.Laser and multiple function printers might be able to automatically select the proper printer emulation mode based on the print data that it is sent. However, the supported emulation modes will still determine the printer capabilities and the MFRTYPMDL for HPT or PDT File for PC5250 setting that is needed. For best results, these printers should support HP PCL3, HP PCL5, HP PCL6, or IBM PPDS, if possible. A *LAN 3812 SNMP device description cannot be used to print to this printer when directly connected to the LAN. Prevent hair damaged from harsh chemical, a line of products that combine the best between nature and science. Maximum respect to your hair and scalp

CNNTYPE(*IP) DESTTYPE(*OTHER) TRANSFORM(*YES) MFRTYPMDL(Based on the emulation: *IBM42011 -OR- *EPFX850) Konica Minolta have developed some of the most advanced laser printing technologies worldwide and their latest cutting-edge Simitri HD toner offers exciting new developments in toner production. Simitri high definition polymerised toner uses tiny particles that contain wax for beautiful colour reproduction and breathtaking image quality that can rival offset printing. This oil-less Konica Minolta toner produces vivid colours and photos appear more natural. Konica Minolta Simitri HD toner also has an environment friendly production process compared to conventional toners, generating up to 40% less gasses such as CO2 that contribute to global warming. The magicolor® 2300W makes high quality 1200 x 600 dpi prints on standard copier paper without any fuss, removing the need for special paper.

The terms Epson ESC/POS and Epson ESC/POS emulation refer to a version of the ESC/P2 printer data stream specifically for Point-of-Sale (POS) or transaction printers. ESC/POS was developed by Epson, and it is used primarily, if not exclusively, in point-of-sale printers. This printer language is not supported by Host Print Transform (HPT), but HPT should pass the ESC/POS data stream to the printer untouched when configured to use the QWPDEFAULT system-supplied Workstation Customizing Object (WSCST). If you want a simple to operate personal colour laser printer that will help your documents stand out from the crowd – look no further than the Minolta-QMS magicolor® 2300W. The printer data stream is a host-based or Windows-only data stream. The data stream is not compatibile with Host Print Transform (HPT) or a Printer Definition Table (PDT) file, and cannot be used to print *AFPDS or *USERASCII spooled files. Note: If being able to print from a System i is a requirement, then purchasing a host-based printer is not recommended, particularly if printing *AFPDS spooled files is also a requirement. For more information on *LAN 3812 PJL device descriptions, please refer to the following documents:

Using and installing a magicolor® 2300W is very straight forward. The printer comes with Microsoft certified drivers for assured compatibility and intuitiveness. Installation can either be carried out through Minolta-QMS automatic installer or by using Microsoft’s ‘Plug-and-Play’ automatic installation system. This section also contains links to Rochester Support Center knowledgebase documents that provide additional information and step-by-step instructions on configuring Remote Output Queues, *LAN 3812 device descriptions that use the TSPLPRD utility, *LAN 3812 PJL device descriptions, *LAN 3812 SNMP device descriptions, *LAN 3812 IPP device descriptions, and PC5250 printer sessions. The Printer Data Stream column lists the printer data streams supported by each particular printer. If the printer lists more than one data stream, you can look across the table for each data stream to see how it is supported by PC5250 Printer Definition Table (PDT) Files, Host Print Transform (HPT), Remote Output Queues, *LAN 3812 PJL device descriptions, *LAN 3812 SNMP device descriptions, and *LAN 3812 IPP device descriptions. Support for these can differ depending on the data stream. Not enough is known about this printer, the network interface card (NIC), or the external print server typically shipped with the printer to know whether a *LAN 3812 PJL device description will work or not.N1019586: Configuring a *LAN 3812 Device Description that Uses the LPR Print Driver (TSPLPRD) Exit Program Note: A large number of HP LaserJet and compatible printers, and even some line matrix printers, have built-in support for SNMP. Many printers will have support for both PJL and SNMP, but even more printers have support for only SNMP, so if the SNMP field has a "?" then it is a good idea to try configuring a *LAN 3812 SNMP device description to see if it will work. Dot matrix, line matrix, impact, ink jet, and thermal label printers usually support only one printer emulation mode at a time. Furthermore, the printer might need to be in a particular emulation mode to work well with the System i. It is recommended that you first determine the current emulation mode for the printer and then look through the list to determine the printer capabilities and the MFRTYPMDL for HPT or the PDT File for PC5250 setting that is needed. For best results, these printers should be in IBM or Epson emulation mode, if possible. The printer data stream is not host-based. The printer data stream still may not be compatible with Host Print Transform (HPT) or a Printer Definition Table (PDT) file.

For more information on the Printer Data Stream, Host-Based, MFRTYPMDL for HPT, LPR, PJL, SNMP, IPP, and PDT File for PC5250 columns, please refer to the section titled Explanation of the Fields in the Printer Lists at the bottom on this document. Because they use a proprietary printer data stream, they do not work with Host Print Transform (HPT) or a PC5250 Printer Definition Table (PDT) file. Because they will not work with HPT, they also will not work to print *AFPDS spooled files through the AFPDS-to-ASCII Transform code within HPT. The only way to get a host-based printer to print IBM i family spooled files is to attached it to a host computer and then use printer emulation software, such as a PC5250 printer session, to print the spooled file through the host-based printer driver.If Host-Based is set to N and MFRTYPMDL for HPT has a value other than n/a, then the printer model should work with Host Print Transform (HPT). It is recommended that HPT be used whenever possible because it supports printing *AFPDS spooled files on laser printers and provides better formatting and font control through modified Workstation Customizing Objects (WSCSTs). If unsure whether a printer will work well with a System i, start by looking at the Printer Data Stream, Host-Based, and MFRTYPMDL for HPT columns. The TSPLPRD exit program is an unsupported utility that can be used to configure a *LAN 3812 printer device description to send spooled files to an ASCII printer using LPR/LPD. Remote Output Queues also send using LPR/LPD, but the TSPLPRD exit program uses a printer writer, rather than a remote writer. For more information on the unsupported TSPLPRD LPR print driver exit program, please refer to the following documents: General Application time 25 – 35 Minutes approx, depending on the state and degree of the hair’s receptivity.