Makita HR4013C/1 110V SDS-Max AVT Rotary Demolition Hammer Supplied in A Carry Case

Product Information

The 1-9/16” AVT® Rotary Hammer (model HR4013C) has 45% less vibration and 20% more impact energy than the previous model. It is engineered with enhanced Anti-Vibration Technology (AVT®), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT® is a category-leading vibration rating of 5m/s². Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage. Powerful 11 AMP motor delivers 8.4 ft.lbs. / 11.4 J. of impact energy to handle the most demanding applications

You might notice a chemical smell at first when you take it out of the box. Although this can be off-putting for some users, it can dissipate eventually if you put it in a place with proper ventilation. This might be a concern if you’re sensitive to chemical smells. What Are the Alternatives?Another great feature of this model is the soft-start function to improve user control, as well as the constant speed powered by the electronic controller even under heavy loads. Since it is capable of variable speed, you can switch between 1,450 and 2,900 BPM modes (with a no-load speed of 250 to 500 RPM). As with most powerhouse rotary hammers, it is corded and comes with a 15-foot-long line. Quality Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling

This rugged 2-mode machine – rotary drilling with hammer action and hammer action-only for chiselling - has the easy-to-operate mode change switch positioned conveniently on top of the motor body ahead of the vibration reducing rear grip handle. With variable speed controlled by the grip trigger, and a constant speed control that can be set for constant running when chiselling, the HR4013C can also be used with the trigger controlling chiselling for intermittent work. P264 Wash … thoroughly after handling.P273 Avoid release to the environment.P337 If eye irritation persists:P313 Get medical advice/attention.P280 Wear protective gloves/protective clothing/eye protection/face protection. L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replacedThe Makita HR4013C’s 11-amp motor has up to 8.4 foot-pounds of impact energy. Weighing just over fifteen pounds, it sports a maximum concrete drilling capacity of 1-9/16 inch. You can also try the Bosch 11264EVS if you want that variable speed function, although this one has a slightly bigger drilling capacity. It also has a similar vibration control mechanism similar to the Makita HR4013C. Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds For jobs that require a lot of power (e.g. hard clay soil and trenching), you’ll definitely like the Makita HR4013C and its 11-amp motor. Furthermore, its anti-vibration technology helps a lot when it comes to tough material and leaves you feeling less tired afterward.

In hammering mode, on/off switch is switchable between two switches to meet your application, for continuous or intermittent chiselling applications Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body

Makita always delivers the best quality for its customers. All Makita products are bound by a one-year limited warranty. They’ll repair your tool free of charge once proven that the tool had defects in workmanship or material. Overall, the Makita HR4013C is a great choice if you’re looking for a rotary hammer with soft vibration, especially if user fatigue is your biggest concern.

If you are still unsure, go through the list of pros and cons below to help with your decision. Pros of the Product As mentioned above, the AVT, or anti-vibration technology, helps reduce user fatigue when you’re working on very difficult tasks for long periods of time. Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5 m/s²Makita's Latest AVT 40mm SDS MAX Rotary Hammer Allows 8-Hour Working The latest version of Makita’s popular 40mm AVT rotary hammer drill delivers a massive 25% increase in impact power with an even larger 30% reduction in vibration rating. Impact energy of the new Makita HR4013C is increased to 7.6 Joules whilst the vibration rating in hammer-only action is ultra-low at 4.5m/sec² and in rotary hammer drilling mode an equally impressive 5.0m/sec². The tool weighs 15.1 pounds, but it should be noted that the majority of the heavy-duty and standard-sized rotary hammers out there weigh about the same. However, if you are a beginner or one who prefers lightweight tools, this might be on the heavier side for you. Without proper ventilation, you may sense a factory-like smell.